- Heavy Copper FR4 PCB
- 2024-11-06 06:18
- Heavy copper FR4 PCB is FR-4 PCBs with a copper weight of more than 2oz. Heavy copper PCBs have the best elongation properties and are not limited by processing temperature.
- High Tg FR4 PCB
- 2024-08-14 11:30
- With the rapid development of the electronics industry, the requirements for high Tg FR4 PCBs are becoming higher due to their high heat resistance.
- Multi-Layer FR4 PCB
- 2024-07-28 22:11
- Multi-layer FR-4 PCB have multi-layer copper layers，two of which are on the outer surface and the remaining layers are integrated into inner of the board, there have a dielectric layer between each two layers.
- Single-Sided FR4 PCB
- 2024-07-22 03:58
- Single-sided FR-4 PCB refers to the most basic PCB which components are concentrated on one side, the circuit trace are concentrated on the other side, Single-sided FR-4 PCB circuit trace are mainly process by th screen printing.
- Double-Sided FR4 PCB
- 2024-05-20 19:08
- Double-Sided FR-4 PCB have circuit traces on both sides, the circuit trace on top side and bottom are connected by vias. A via is a small hole filled or coated with metal on the PCB, which can be connected to the wires on both sides.
- High Tg FR4 PCB
- 2020-12-16 00:25
- With the rapid development of the electronics industry, the the require of High Tg FR4 PCB is higher and higher because of the High Tg FR4 PCB have higher heat resistance.
- Heavy Copper FR4 PCB
- 2020-11-23 21:11
- Heavy Copper FR-4 PCB refers to the FR-4 PCB which copper weight is over 2oz, Heavy Copper PCB have the best elongation performance and are not limited by processing temperature.
- Single-Sided FR4 PCB
- 2020-08-11 09:54
- Single-sided FR-4 PCB refers to the most basic PCB which components are concentrated on one side, the circuit trace are concentrated on the other side, Single-sided FR-4 PCB circuit trace are mainly process by th screen printing.
- Double-Sided FR4 PCB
- 2020-07-26 06:03
- Double-Sided FR-4 PCB have circuit traces on both sides, the circuit trace on top side and bottom are connected by vias. A via is a small hole filled or coated with metal on the PCB, which can be connected to the wires on both sides.
- Multi-Layer FR4 PCB
- 2020-06-24 10:41
- Multi-layer FR-4 PCB have multi-layer copper layers，two of which are on the outer surface and the remaining layers are integrated into inner of the board, there have a dielectric layer between each two layers.
